精密過濾器系列

◆工況條件與技術指標 Working condition and technical indexes

C級-主管路過濾器

多用于空壓機后部冷卻器之后或冷凍式干燥機及其他過濾器之前來保護整個系統。可濾除大量液體及3微米以上之固態顆粒，達到殘留油份含量?jī)H5PPMX/W。

T級-空氣管路過濾器

多裝置在工具、機械、馬達、氣缸等設備及A級效除油過濾器前，可吸附式干燥機后以移除水份及粒子。可濾除小至1微米之液體及固體顆粒，達到低殘留油份僅0.5PPW/W。

A級-效除油過濾器

多用于吸附式干燥機上游或冷凍式干燥機下游以確保系統所使用之空氣處于完全無油狀態。可濾除小到0.01微米之液體及固體顆粒，達到低殘留油份量?jī)H僅只有0.001PPMW/W。切記一定要在上游加裝T級空氣管路過濾器以保護之。

H級-活性碳除臭過濾器

濾心經特殊活性碳滲透處理，能完全吸附碳?xì)浠衔锏葰怏w異味以達到完全無臭無味之質量空氣品質要求，如食品、藥品、呼吸用空氣等。可濾除小至0.01微米之油霧及碳?xì)浠衔铮_(dá)到殘留油份含量?jī)H0.003PPMW/W。切記一定要在上游加裝A級效除油過濾器以保護之。

Level C-Major pipeline strainer

Many used for air compressor back after cooler or freezing drying machine and other filter to protect the whole system. It can filter out a lot of liquid and solid particles of the more than three micron, achieve a minimum of residual oil containing only 5 PPMX/W.

Level T- Air pipe filters

Most of the devices is used in the tool, machinery, motor, cylinder equipment and before super efficient except oil filter in level A, absorbing type desiccator to remove moisture and the particle. Can filter out small to 1 micron of liquid and solid particles, achieve a minimum of residual oil only 0.5 PPW/W.

Level A- Super efficient except oil filter

Many used for adsorption dryer upstream or freezing drying downstream machine to ensure that the system the use of air in a complete state of no oil. Can filter out small to 0.01 micron of liquid and solid particles, residual oil up to the minimum weight only 0.001 PPMW/W. Be sure to make  T level air pipe filters in upstream to protect.

Level H- Active carbon deodorant filter

Filter was processed by special activated carbon, it can completely adsorption hydrocarbons and so on gas odor to achieve it completely not smelly no taste quality and senior air quality requirements, such as food, medicines, breathing air, etc. Can filter out small to 0.01 micron oil mist and hydrocarbons, to achieve the minimum residual oil content of only 0.003 PPMW/W. Be sure to make A level air pipe filters in upstream to protect.